7 Effects of Lubricating Oil The engine is the heart of the car. It contains many metal surfaces that rub against each other. The speed of these parts, the harsh environment, and the working temperature can reach 400 degrees Celsius to 600 degrees Celsius.

　　Under such harsh conditions, only qualified lubricating oil can reduce the wear and tear of engine parts and extend their service life.

　　What are the requirements for qualified lubricating oil?

　　What are the seven functions of lubricating oil?

　　Lubrication: There is a rapid relative slip between the piston and the cylinder, and between the spindle and the shaft.

　　In order to prevent excessive wear of the parts, an oil film should be established between the two sliding surfaces.

　　The oil film with sufficient thickness can separate the surfaces of the relatively sliding parts to reduce wear.

　　Cooling Cooling: The oil can redistribute heat to the fuel tank to help cool the engine.

　　Cleaning Cleaning: Use good oil to process the engine parts, so that the metal particles circulate back to the machine fuel tank, and through the flow of lubricating oil, the dirt on the working surface is cleaned.

　　Sealing leakage: The oil can form a sealing ring between the piston ring and the piston to reduce the leakage of gas and prevent pollutants from entering from the outside. Anti-corrosion: The lubricating oil can

　　absorb water, air, acid, harmful gases and partial contact with the surface of the parts.

　　Shock absorption: When the engine cylinder pressure rises sharply, the sudden strengthening piston, piston, connecting rod and crankshaft bearing load is very large. After the bearing is lubricated, the load that bears the impact load has the effect of a buffer.

　　Anti-wear: Adding lubricating oil to the surface reduces the friction coefficient, thereby reducing friction resistance, saving energy consumption, and reducing wear: lubrication friction wear and surface fatigue between friction wear, friction loss caused by sticky wear.

　　It has excellent wear resistance, oxidation resistance, good sealing performance, high efficiency and clean performance.

　　The unique molecular penetration technology allows the oil film to be permanently attached to the engine, so that the engine can be protected within 24 hours.

　　The products sold in the domestic market have high cost performance and provide perfect professional protection for various high-performance engines.